the information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. this documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. it is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. neither schneider electric industries sas nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein. 7/11/2011 1 product data sheet characteristics abl8mem24012 regulated smps - 1 or 2-phase - 100..240 v ac - 24 v - 1.2 a main range of product phaseo product or component type power supply power supply type regulated switch mode input voltage 100...240 v ac phase to phase, terminal(s): l1-l2 100...240 v ac single phase, terminal(s): n-l1 120...250 v dc output voltage 24 v dc rated power in w 30 w input protection type integrated fuse (not interchangeable) power supply output current 1.2 a output protection type against short-circuits ambient air temperature for operation -25...70 c without derating complementary input voltage limits 85...264 v network frequency 47...63 hz inrush current <= 20 a cos phi > 0.5 efficiency > 82 % output voltage limits 22.2...28.8 v adjustable power dissipation in w 6.6 w current consumption 0.4 a at 240 v 0.65 a at 100 v line and load regulation +/- 3 % residual ripple 250 mv holding time >= 10 ms at 100 v >= 150 ms at 230 v connections - terminals screw type terminals for input connection, connection capacity: 2 x 0.14...2 x 2.5 mm2awg gauge26...14 screw type terminals for output connection, connection capacity: 4 x 0.14...4 x 2.5 mm2awg gauge26...14 marking ce mounting support 35 x 15 mm symmetrical din rail 35 x 7.5 mm symmetrical din rail panel 2 screws, diameter : 4 mm operating position vertical output coupling parallel series name of test conducted emissions on the power line conforming to en 55022 class b electrostatic discharges conforming to en/iec 61000-4-2 emission conforming to en 50081-1 harmonic current emission conforming to en/iec61000-3-2 induced electromagnetic field conforming to en/iec 61000-4-6 primary outage conforming to iec 61000-4-11 radiated electromagnetic field conforming to en/iec 61000-4-3 radiated emissions conforming to en 55022 class b rapid transient conforming to iec 61000-4-4 surge conforming to en/iec 61000-4-5 status led 1 led green for output voltage product weight 0.195 kg
2 environment product certifications ccsaus csa 22-2 no 950-1 c-tick culus 508 tuv 60950-1 environmental characteristic emc conforming to en 55022 class b emc conforming to en 61000-6-3 emc conforming to en/iec 61000-6-2 emc conforming to en/iec 61204-3 safety conforming to en/iec 60950-1 safety conforming to selv ip degree of protection ip20 conforming to en/iec 60529 ambient air temperature for storage -40...70 c relative humidity 0...90 % during operation 0...95 % in storage class of protection against electric shock class ii conforming to vde 0106-1 dielectric strength 3000 v between input and output rohs eur status compliant rohs eur conformity date 0501
3 product data sheet dimensions drawings abl8mem24012 regulated switch mode power supplies dimensions a in mm a in in. a1 in mm a1 in in. abl8mem05040 54 2.12 42 1.65 abl8mem12020 54 2.12 42 1.65 abl8mem24003 36 1.41 24 0.94 abl8mem24006 36 1.41 24 0.94 abl8mem24012 54 2.12 42 1.65 ABL7RM24025 74 2.91 60 2.36
4 product data sheet connections and schema abl8mem24012 regulated switch mode power supply internal wiring diagram regulated switch mode power supplies series or parallel connection series connection (1) two shottky diodes imin = power supply in and vmin = 50 v parallel connection family series parallel abl ? 7rm/8mem 2 products max. 2 products max. series or parallel connection is only recommended for products with identical references.
5 product data sheet performance curves abl8mem24012 regulated switch mode power supplies derating the ambient temperature is a determining factor that limits the power an electronic power supply can deliver continuously. if the temperature around the electronic components is too high, their life will be significantly reduced. the nominal ambient temperature for the modular range of phaseo power supplies is 55c. above this temperature, derating is necessary up to a maximum temperature of 70c (except for the ABL7RM24025 model). the graph below shows the power as a percentage of the nominal power that the power supply can deliver continuously, depending on the ambient temperature. x maximum operating temperature (c) (1) with an ABL7RM24025 (2) with an abl8mem?????
|
